Hexy Templates

Wyze Bridge

Create a local WebRTC, RTSP, RTMP, or HLS/Low-Latency HLS stream for most of your Wyze cameras

Not yet tested security Based on TrueNAS app v1.1.8 (Wyze Bridge 2.10.3)
Project website TrueNAS app source Script on GitHub Report a problem
  1. 1
    Copy the script below
  2. 2
    In HexOS, open Apps, find Wyze Bridge and choose Custom Install
  3. 3
    Paste, then press Install — full guide with screenshots
wyze-bridge.json
Download 
1{
12  "version": 5,
23  "script": {
4    "version": "0.1.0",
5    "changeLog": "Auto-generated draft from TrueNAS wyze-bridge 1.1.8"
6  },
7  "requirements": {
38    "locations": ["ApplicationsPerformance"],
49    "specifications": ["2CORE"],
510    "permissions": ["READ_WRITE_LOCATIONS"],
611    "ports": [31061, 31062, 31063, 31064, 31065, 31066]
12  },
713  "ensure_directories_exists": [
14    {"path": "$LOCATION(ApplicationsPerformance)"},
15    {"path": "$LOCATION(ApplicationsPerformance)/wyze-bridge"},
16    {
17      "path": "$LOCATION(ApplicationsPerformance)/wyze-bridge/data",
18      "snapshot": {"id": "data"}
19    }
20  ],
21  "app_values": {
22    "storage": {
823      "data": "$HOST_PATH($LOCATION(ApplicationsPerformance)/wyze-bridge/data)"
24    },
25    "network": {
926      "web_port": {"bind_mode": "published", "port_number": 31061},
1027      "rtmp_port": {"bind_mode": "published", "port_number": 31062},
1128      "rtsp_port": {"bind_mode": "published", "port_number": 31063},
1229      "hls_port": {"bind_mode": "published", "port_number": 31064},
1330      "webrtc_port": {"bind_mode": "published", "port_number": 31065},
1431      "webrtc_ice_port": {
32        "bind_mode": "published",
33        "port_number": 31066
34      }
35    },
1536    "resources": {"limits": {"cpus": 2, "memory": "$MEMORY(10%, 4096)"}}
37  }
38}

What this script does

Hover or tap a box to see the lines it explains.

  1. Script format

    Tells HexOS this is a version 5 install script, so it knows how to read the rest.

    Line 2

  2. Script revision

    This copy of the script is revision 0.1.0. Latest change: “Auto-generated draft from TrueNAS wyze-bridge 1.1.8”.

    Lines 3–6

  3. Storage locations it needs

    The app uses these HexOS storage locations: App storage (fast). If one isn't set up yet, HexOS will ask you to pick a place for it.

    Line 8

  4. Minimum hardware

    Recommended minimum: 2 CPU cores.

    Line 9

  5. Permission to use your folders

    Allows the app to read and write files inside the storage locations listed above — and nowhere else.

    Line 10

  6. Network ports

    The app needs ports 31061, 31062, 31063, 31064, 31065 and 31066 to be free on your server. A port is like an apartment number for your server's address.

    Line 11

  7. Folders created on install

    Creates the folders the app needs before it starts: App storage (fast) › wyze-bridge and App storage (fast) › wyze-bridge › data. Folders marked “snapshot” are included in HexOS snapshots, so you can roll them back.

    Lines 13–20

  8. Where the app's main data is saved

    Where the app's main data is saved on your server: App storage (fast) › wyze-bridge › data.

    Line 23

  9. Web port: 31061

    The app's web page is published on port 31061. You don't need to remember it — clicking the app's card in HexOS takes you there.

    Line 26

  10. Rtmp port: 31062

    Publishes the app's rtmp port as 31062.

    Line 27

  11. Rtsp port: 31063

    Publishes the app's rtsp port as 31063.

    Line 28

  12. Hls port: 31064

    Publishes the app's hls port as 31064.

    Line 29

  13. Webrtc port: 31065

    Publishes the app's webrtc port as 31065.

    Line 30

  14. Webrtc ice port: 31066

    Publishes the app's webrtc ice port as 31066.

    Lines 31–34

  15. Resource limits

    Caps how much of your server the app can use: 2 CPU cores and 10% of your server's memory, but never more than 4 GB. This keeps one busy app from slowing everything else down.

    Line 36